Wells
Well System Plumbing in Clemmons, NC
Well systems, done to the MAX. Well-certified diagnosis and repair of pressure tanks, switches, and controls, the plumbing side of a private well system.
- NC License #37600
- Upfront pricing
- 1-year warranty
- Residential
Wells
Well systems, done to the MAX.
Homes on a private well depend on a pressure system to turn a pump’s output into steady household pressure. When that system goes out of adjustment or a component fails, the symptoms are unmistakable, pressure that surges and drops in the shower, a pump that clicks on and off every few seconds, or water that disappears entirely.
We are well system certified and diagnose the plumbing side of these systems, pressure tanks, pressure switches, gauges, check valves, and the associated piping. Just as importantly, we tell you when the problem is not on the plumbing side at all and is instead the pump, the wiring, or the well itself, so you are not paying us to replace parts that were never the issue.
Rapid pump cycling is the most common thing we are called for, and it is worth taking seriously, every start and stop wears the pump, and a waterlogged pressure tank can destroy an otherwise healthy pump surprisingly fast.
Brands
Problems we solve
What this solves
If any of these sound familiar, you are in the right place.
- Low or inconsistent water pressure on a well
- Pump cycling rapidly on and off
- Pressure that climbs and drops while a fixture runs
- Complete loss of water
- Failed or burned pressure switch
- Waterlogged or failing pressure tank
- Leaking well-system piping or fittings
Our standard
What you get with MAX
Clear diagnosis. Upfront price. Work built to last.
Detail
Well system certified
Specific training on private well pressure systems, not general plumbing applied by analogy.
Detail
Cycling diagnosed properly
Short cycling almost always traces to tank precharge or a failing switch, both are testable.
Detail
Honest scope boundaries
We tell you when the issue is the pump, wiring, or well rather than the plumbing we can fix.
Detail
Pressure verified after service
Cut-in and cut-out pressures and tank precharge set and confirmed before we leave.
Real work
Recent well system plumbing work
Photos and clips from actual MAX Plumbing jobs.
Water Filtration & Softeners
Filtration paired with UV, common on well systems.
Well Systems
New pressure tank, the fix for a pump that short-cycles itself to death.
Well Systems
Pressure tank replacement, including setting the precharge.
Well Systems
Bladder tank and controls after replacement.
Well Systems
Pressure tank replacement with the precharge set to match the switch.
Well Systems
Well system work, we handle the plumbing side and say so when it is the pump.
Service areas
Well System Plumbing across the Triad
We provide well system plumbing throughout our service area. Pick your town for local details, or call 336-814-8844 and we will tell you straight away whether you are in range.
Wells
Well System Plumbing, on the job
Pressure tank replacement, including setting the precharge.
Full galleryFAQ
Well System Plumbing FAQs
Straight answers to what people ask us most about this service.
Why does my well pump keep turning on and off?
Rapid cycling is nearly always a waterlogged pressure tank, the air charge has been lost, so there is no reserve volume between the switch’s cut-in and cut-out points. A failing pressure switch or a leaking check valve can produce the same symptom. It is worth fixing quickly, because cycling wears pumps out fast.
How long does a well pressure tank last?
Commonly 8 to 15 years. A tank that has been running short-cycled, or one that was never set to the correct precharge for the switch, will fall well short of that.
Do you work on the well pump itself?
We handle the plumbing side of the system, pressure tanks, switches, controls, and piping. When the diagnosis points to the pump or the well, we will tell you plainly so you can bring in the right specialist rather than paying for parts that will not solve it.
Should I test my well water?
Yes, and periodically. Well water is not treated by a municipality, and iron, sulfur, sediment, and hardness vary around Davie and Forsyth County. Forsyth and Davie both run private-well sampling programs. Our water testing is free.
Request
Need well system plumbing?
Send us the details and we will get back to you during business hours. If it is urgent, calling is always faster.
Upfront pricing approved before work begins
Licensed and insured. NC License #37600
1-year warranty on labor and materials we supply
No-interest financing available, subject to approval
Call
Your plumbing has reached its limit. Time to call MAX.
Hot water, water quality, drains, sewer lines, or everyday repairs. Clear answers and a solution built to last.
Monday to Friday: 6:30 AM to 8:30 PM / 24/7 call answering / NC Plumbing License #37600